Description

Specification: Type: 200PSI black air compressor Thread: 1/4" NPT stainless steel braided leader hose Working Voltage:12 Volt Package Size(inch):12.2*8.6*6.7 Compressor Size: 9.4"(L)×3.9"(W)×4.4"(H) Max Amp Draw:23 Amps Color:Black Duty Cycle:55%@200 PSI Duty Cycle:100%@100 PSI Material:Metal Max Working Pressure:200 PSI Product Information: For Train Horns Air Horn Air Suspension Kit 12V 200PSI Air Compressor Kit Specification: Type: 200PSI black air compressor Thread: 1/4" NPT stainless steel braided leader hose Working Voltage:12 Volt Package Size(inch): 12.2*8.6*6.7 Compressor Size: 9.4"(L)×3.9"(W)×4.4"(H) Max Amp Draw:23 Amps Color:Black Duty Cycle:55%@200 PSI Duty Cycle:100%@100 PSI Material:Metal Max Working Pressure:200 PSI Product Information: This black maintenance free heavy duty air compressor rated at 200PSI is designed for use with any high-pressure on-board air system, or other applications that require an air pressure supply. Unit comes with a standard 1/4" NPT stainless steel braided leader hose and mounting hardware. Ideal for all vehicles with a 12V system. Included in this kit: 1 * 200PSI air compressor with 1/4" NPT stainless steel braided leader hose mounting hardware SAFETY INSTRUCTIONS: Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Avoid reaching out to touch or pick up any fallen or water submerged parts. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Installation Tips: COMPRESSOR MOUNTING: Determine a dry place to mount your compressor. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the compressor to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. If you are planning to move compressor’s air intake to an area other than where the compressor was installed, make sure your placement allows for the airline to be routed from the air inlet of the compressor to the remote inlet air filter Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the compressor is secured. To enhance performance and make sure the battery of your vehicle doesn’t discharge, keep the engine running while the compressor is being used. BRAIDED HOSE INSTALLATION: Connect the stainless steel braided hose of the compressor to the tank’s inlet port. IMPORTANT: The tank’s inlet port must be 1/4" N.P.T. (National Pipe Thread). CHECK VALVE: The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: When installing the braided hose do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. REMOTE FILTER: Using a compatible remote air filter installation kit (NOT PROVIED) your compressor’s air intake can be installed in an area other than where the compressor was installed. THERMAL OVERLOAD PROTECTION: The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. COMPRESSOR ELECTRICAL CONNECTION: The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor and to use the included fuse for circuit’s protection. Attach the black wire to any of the Pressure Switch’s connections located on the air tank. The remaining Pressure Switch connection should be attached to ground. Secure the end to any metal body or to the negative side of the vehicle’s battery. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch's cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. MAINTENANCE: Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty. Just remove the front cover of the filter’s housing to reach it. Replacement time frames depend on the operating environment and how often it is used. Clean dirt and dust from heat spreader and motor housing of the compressor. The motor of the air compressor has a maintenance-free lasting lubricant. DO NOT LUBRICATE. SOLUTIONS TO COMMON ISSUES: Issue: Compressor inoperable. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Excessive moisture in horn or safety valve. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Solution 2: Replace the compressor. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. S olution 4: Replace safety valve if present in the tank, it may be defective. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Make sure you never attempt to disassemble this horn kit’s electrical components. Never use your bare hands to any part of the compressor immediately after or during use. Avoid operating this product in an area with risk of falling or submergence into a liquid (water). Do not reach out for or touch any component that has fallen or been submerged into water. Make sure you set up in areas with good ventilation. Never sound the air horn anywhere near your ear(s) or that of another person. Make sure your battery ground is detached before getting your installation started. Employ equipment for eye protection during drilling operations. The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Item Specifics Brand hqas-accessories Manufacturer Part Number HQ169892A01 Type Horn Part Type Air Compressor Horn Type High Pressure Air Material Metal Fitment Type Direct Replacement Color Black Manufacturer Warranty 1 Year Placement on Vehicle Left Package Size(inch) 12.2*8.6*6.7 Package Weight 9.48LB Voltage 12V Payment PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries. All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. Returns WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov. We stand behind every product we sell. All of our brand new items come with a 60-Days money-back guarantee. We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. Shipping & handling cost are not refundable. Man-made damage by abuse or wrong operation is not covered by this warranty. No product liability insurance is assumed. Contact Us Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ] Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ] We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please. DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US For Train Horns Air Horn Air Suspension Kit 12V 200PSI Air Compressor Kit Specification: Type: 200PSI black air compressor Thread: 1/4" NPT stainless steel braided leader hose Working Voltage:12 Volt Package Size(inch): 12.2*8.6*6.7 Compressor Size: 9.4"(L)×3.9"(W)×4.4"(H) Max Amp Draw:23 Amps Color:Black Duty Cycle:55%@200 PSI Duty Cycle:100%@100 PSI Material:Metal Max Working Pressure:200 PSI Product Information: This black maintenance free heavy duty air compressor rated at 200PSI is designed for use with any high-pressure on-board air system, or other applications that require an air pressure supply. Unit comes with a standard 1/4" NPT stainless steel braided leader hose and mounting hardware. Ideal for all vehicles with a 12V system. Included in this kit: 1 * 200PSI air compressor with 1/4" NPT stainless steel braided leader hose mounting hardware SAFETY INSTRUCTIONS: Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Avoid reaching out to touch or pick up any fallen or water submerged parts. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Installation Tips: COMPRESSOR MOUNTING: Determine a dry place to mount your compressor. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the compressor to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. If you are planning to move compressor’s air intake to an area other than where the compressor was installed, make sure your placement allows for the airline to be routed from the air inlet of the compressor to the remote inlet air filter Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the compressor is secured. To enhance performance and make sure the battery of your vehicle doesn’t discharge, keep the engine running while the compressor is being used. BRAIDED HOSE INSTALLATION: Connect the stainless steel braided hose of the compressor to the tank’s inlet port. IMPORTANT: The tank’s inlet port must be 1/4" N.P.T. (National Pipe Thread). CHECK VALVE: The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: When installing the braided hose do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. REMOTE FILTER: Using a compatible remote air filter installation kit (NOT PROVIED) your compressor’s air intake can be installed in an area other than where the compressor was installed. THERMAL OVERLOAD PROTECTION: The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. COMPRESSOR ELECTRICAL CONNECTION: The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor and to use the included fuse for circuit’s protection. Attach the black wire to any of the Pressure Switch’s connections located on the air tank. The remaining Pressure Switch connection should be attached to ground. Secure the end to any metal body or to the negative side of the vehicle’s battery. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch's cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. MAINTENANCE: Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty. Just remove the front cover of the filter’s housing to reach it. Replacement time frames depend on the operating environment and how often it is used. Clean dirt and dust from heat spreader and motor housing of the compressor. The motor of the air compressor has a maintenance-free lasting lubricant. DO NOT LUBRICATE. SOLUTIONS TO COMMON ISSUES: Issue: Compressor inoperable. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Excessive moisture in horn or safety valve. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Solution 2: Replace the compressor. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. S olution 4: Replace safety valve if present in the tank, it may be defective. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Make sure you never attempt to disassemble this horn kit’s electrical components. Never use your bare hands to any part of the compressor immediately after or during use. Avoid operating this product in an area with risk of falling or submergence into a liquid (water). Do not reach out for or touch any component that has fallen or been submerged into water. Make sure you set up in areas with good ventilation. Never sound the air horn anywhere near your ear(s) or that of another person. Make sure your battery ground is detached before getting your installation started. Employ equipment for eye protection during drilling operations. The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Payment Shipping Returns Contact Us PayPal preferred. Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries. All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days. We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay. The tracking number will be given for the customer to check the shipping status online (registered or faster service only). We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov. We stand behind every product we sell. All of our brand new items come with a 60-Days money-back guarantee. We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. Shipping & handling cost are not refundable. Man-made damage by abuse or wrong operation is not covered by this warranty. No product liability insurance is assumed. Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ] Q: How do I pay for my purchase? A: MY store accepts PayPal. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ] We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please. All right reserved. Shop Category Store Home Horn Steering Knuckle Power Brake Booster Tilt Trim Motor Dipstick Ballast Module Struts & Suspension Kit & Hubs Air Ride Suspension Valve Shock & Strut Air Shock Shock absorber assembly Lift Support Coilovers Bumper Brake Caliper Crankcase Vent Valve Removal Tool Metal Heat Shield Sleeve Oil Catch Can Botorcycle Exhaust Pipe Air Dryer Shift Knob Lever Head Adjustable Rear Control Arm Air Intake Snorkel Air Suspension Valve Solenoid Mud Flaps Protection Shield & Lift Kit Cylinder Piston Kit Strut Mount Brake Drums & Brake Shos Mass Air Flow Sensors Household Air Cooler Bushing Brake Pads & Brake Shoes Wheel Hub Bearing Airbag Hairspring Coil Spring Other Hot Item For 1999-2007 Silverado Sierra 1500 DZ43100 Tailgate Assist Struts Lift Support USD 15.19 For 99-14 Ford F-250/350 Super Duty DZ43203 Tailgate Assist Struts Lift Support USD 20.19 For 1982-1992 Pontiac Firebird Chevrolet Camaro 2 Hatch Lift Supports Struts Gas USD 29.99 For 2009-2018 CHRYSLER 300 DODGE CHARGER 5.7L HEMI Engine Oil Level Dipstick USD 8.99 For Jeep Wrangler 4WD 2007 2008-2017 JK 2018 Front and Rear Full Shocks & Struts USD 60.79 Delivery New List Item Pairs For Cadillac Escalade GMC Sierra 1500 HD Front and Rear Brake Calipers Kit USD 289.99 Brake Calipers And Ceramic Pads For Chevrolet Silverado Suburban 1500 Front Rear USD 339.99 For 00-02 Chevrolet Suburban GMC Yukon Front Rear Brake Calipers w/ Ceramic Pads USD 339.99 For 2003-2009 Toyota 4Runner Rear Brake Calipers Right With Bracket USD 56.99 For Chevrolet Silverado Suburban Tahoe Front Rear Brake Calipers W/ Ceramic Pads USD 499.99 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us